New Zealand - Flag New Zealand

Please confirm your currency selection:

New Zealand Dollars
Incoterms:FCA (Shipping Point)
Duty, customs fees and GST collected at time of delivery.
Free shipping on most orders over $66 (NZD)

US Dollars
Incoterms:FCA (Shipping Point)
Duty, customs fees and GST collected at time of delivery.
Free shipping on most orders over $50 (USD)

  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
  • Loading...
Home > NEWEST Products > New by Manufacturer > Texas Instruments > CC1352R SimpleLink Multi-Band Wireless MCU - TI
NEWEST Products

Texas Instruments CC1352R SimpleLink Multi-Band Wireless MCU

Texas Instruments CC1352R SimpleLink Multi-Band Wireless Microcontroller (MCU) is a multi-protocol Sub-1 and 2.4GHz wireless MCU. This MCU targets Wireless M-Bus, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Thread, Zigbee®, KNX RF, Wi-SUN®, Bluetooth® 5 Low Energy, and proprietary systems, including the TI 15.4-Stack. The CC1352R device is a member of the SimpleLink™ MCU platform of cost-effective, ultra-low power, 2.4GHz and Sub-1GHz RF devices. Very low active RF and microcontroller (MCU) current, in addition to sub-µA sleep current with up to 80KB of parity protected RAM retention, provide excellent battery lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.

The CC1352R device combines a flexible, very low-power RF transceiver with a powerful 48MHz Arm® Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352R device does not come at the expense of RF performance; the CC1352R device has excellent sensitivity and robustness (selectivity and blocking) performance. The flexible radio of the CC1352R enables concurrent time-multiplexed multi-protocol and multi-band operation through the Dynamic Multi-Protocol Manager (DMM) driver. The CC1352R device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter.


  • Microcontroller
    • Powerful 48MHz Arm® Cortex®-M4F Processor
    • EEMBC CoreMark® Score: 148
    • 352KB of In-System Programmable Flash
    • 256KB of ROM for Protocols and Firmware
    • 8KB of Cache SRAM (Alternatively Available as General-Purpose RAM)
    • 80KB of Ultra-Low Leakage SRAM with Parity
    • 2-Pin cJTAG and JTAG Debugging
    • Supports Over-the-Air Upgrade (OTA)
  • Ultra-Low Power Sensor Controller with 4KB of SRAM
  • Sample, Store, and Process Sensor Data
  • Operation Independent from System CPU
  • Fast Wake-Up for Low-Power Operation
  • TI-RTOS, Drivers, Bootloader, Bluetooth® 5 Low Energy Controller, and IEEE 802.15.4 MAC in ROM for Optimized Application Size
  • RoHS-Compliant Package
    • 7mm×7mm RGZ VQFN48 (28 GPIOs)
  • Peripherals
    • Digital Peripherals Can be Routed to Any GPIO
    • 4× 32-Bit or 8× 16-Bit General-Purpose Timers
    • 12-Bit ADC, 200k Samples/s, 8 Channels
    • 2× Comparators with Internal Reference DAC (1× Continuous Time, 1× Ultra-Low Power)
    • Programmable Current Source
    • 2× UART
    • I2C
    • I2S
    • Real-Time Clock (RTC)
    • AES 128 and 256-bit Crypto Accelerator
    • ECC and RSA Public Key Hardware Accelerator
    • SHA2 Accelerator (Full Suite Up to SHA-512)
    • True Random Number Generator (TRNG)
    • Capacitive Sensing, Up to 8 Channels
    • Integrated Temperature and Battery Monitor
  • External System
    • On-Chip Buck DC/DC Converter
  • Low Power
    • Wide Supply Voltage Range: 1.8V to 3.8V
    • Active-mode RX: 5.8mA (3.6V, 868MHz), 6.9mA (3.0V, 2.4GHz)
    • Active-Mode TX 0dBm: 8.0mA (3.6V, 868MHz), 7.1mA (3.0V, 2.4GHz)
    • Active-Mode TX at +14dBm: 24.9mA (868MHz)
    • Active-Mode MCU 48MHz (CoreMark): 2.9mA (60µA/MHz)
    • Sensor Controller, Low Power-Mode, 2MHz, running infinite loop: 30.8µA
    • Sensor Controller, Active-Mode, 24MHz, running infinite loop: 808µA
    • Standby: 0.85µA (RTC on, 80KB RAM and CPU Retention)
    • Shutdown: 150nA (Wakeup on External Events)
  • Radio Section
    • Dual-Band Sub-1GHz and 2.4GHz RF Transceiver Compatible with Bluetooth 5 Low Energy and IEEE 802.15.4 PHY and MAC
    • Excellent Receiver Sensitivity
      • –121dBm for SimpleLink Long Range Mode
      • –110dBm at 50kbps, –105dBm for Bluetooth 125kbps (LE Coded PHY)
    • Excellent Selectivity: 48dB at 50kbps
    • Output Power Up to +14dBm (Sub-1GHz) and +5dBm (2.4GHz) with Temperature Compensation
    • Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
      • ETSI EN 300 220 Receiver Category 1.5 and 2, EN 300 328, EN 303 131, EN 303 204 (Europe)
      • EN 300 440 Class 2 (Europe)
      • FCC CFR47 Part 15 (US)
      • ARIB STD-T108 and STD-T66 (Japan)
    • Wide Standard Support


  • 433, 470 to 510, 868, 902 to 928, and 2400 to 2480MHz ISM and SRD Systems With Down to 4kHz of Receive Bandwidth
  • Home and Building Automation
    • Building Security Systems – motion detector, electronic door lock, door and window sensor, gateway
    • HVAC – thermostat, wireless environmental sensor, HVAC system controller
    • Fire Safety Systems – smoke detector, fire alarm control panel
    • Video Surveillance – IP camera
    • Garage Door Openers
    • Elevator and Escalator Control
  • Smart Grid and Automatic Meter Reading
    • Water, Gas, and Electricity Meters
    • Heat Cost Allocators
    • Gateways
  • Wireless Sensor Networks
    • Long-Range Sensor Applications
  • Asset Tracking and Management
  • Factory Automation
  • Wireless Healthcare Applications
  • Energy Harvesting Applications
  • Electronic Shelf Label (ESL)

Functional Block Diagram

Block Diagram - Texas Instruments CC1352R SimpleLink Multi-Band Wireless MCU